ECD website uses cookies to ensure you get the best experience on our website.

Home / Products / ECD Thermal Profiling Process Test Pallet /


Convection Reflow Oven Verification

Look to ECD’s OvenRIDER® NL 2+ if you need to VERIFY an oven’s performance:

  • post-maintenance
  • pre-production
  • pre-purchase
  • pre-repair
OvenRIDER NL 2+ Process Pallet Logo OvenRIDER NL 2+ Process Pallet


Regardless of the recipe and what your oven's controls indicate, what your PCB actually experiences at board-level as it goes through the oven can be SIGNIFICANTLY different. Achieve convection reflow oven Verification by separating zonal temperatures from convective heat flow efficiency while verifying conveyor speed for a true picture of oven Lead-Free performance consistency.

Profile the oven instead of the circuit board to ensure the reflow oven is capable of continually performing your board recipes. Built-In Statistical Process Control makes OvenRIDER® NL 2+ a superior 'First-Off' tool compared to an overused 'Golden Board', with no thermocouples to attach. The pallet material is designed to withstand thousands of passes through the oven – try that with a PCB!

The patented OvenRIDER® NL 2+ travels through your oven with a M.O.L.E.® inside collecting data for analysis and SPC charting. A combination of thermal and process sensors measure oven performance, delivering consistent data that can be used to identify modest trends which may be developing, or serious conditions that have already arrived. Simple PCB profiling cannot detect all the subtleties which can have a profound effect on PCB production quality.

There are many benefits to utilizing OvenRIDER's power to verify process conditions, or to validate an oven purchasing decision. Contact ECD to discuss, or simply visit our Superstore and get your boost to Quality Assurance started today.

  • Higher temperature rated pallet material: 280°C continuous, 300°C maximum for a longer pallet life
  • Brighter color for better optical sensor board detection
  • Ambient sensor guards that reduce inadvertent sensor damage from handling
  • New thermal barrier cover latch for positive lid closure to reduce the risk of M.O.L.E.® profiler damage due to over temperature or mishandling
  • Provides Go/NO-Go data for the operator
  • Measures true oven performance
  • SPC predicts performance - reduces rework/scrap
  • Simple, objective data - removes interpretation
  • Self contained, simple to use - reduces downtime
  • Automatic SPC report - reduces engineering time
  • CP and Cpk - capability indices - calculated and presented automatically
  • Assures relatable oven performance


Physical Dimensions: Length: 452mm (17.75 in)
Height: 31.75mm (1.25 in)
Width: 168mm (6.6 in), 305mm (12 in) and 457mm (18 in)
Weight (OvenRIDER® NL 2+ only): 168mm (6.6 in) – 1.74 kg (3.84 lbs)
305mm (12 in) – 2.81 kg (6.19 lbs)
457mm (18 in) – 3.54 kg (7.8 lbs)
Max. Operational Temperature (Pallet): 280C [536F] continuous, 300C [572F] max.
Max. Operational Temperature (Thermal Barrier): 204°C (400°F) for 25min. / 260°C (500°F) for 15min.
Pallet Sensors: 6 Type K (Process & Ambient), Special Limits of Error K-Type T/C wire(± 1.1°C or 0.4%, whichever is greater)
Recording Interval (SuperM.O.L.E.® Gold / 2): 0.1 Second
Data Capacity (SuperM.O.L.E.® Gold): 9 minutes 6 seconds
Data Capacity (SuperM.O.L.E.® Gold 2): 2,500 minutes (100% memory)

Download Complete Specifications


Standard Kit Photo Part Number Superstore
• OvenRIDER® NL 2+ System with 12in. / 305mm Wide Pallet E56-6836-15
Includes the following:
  • OvenRIDER® NL 2+ Pallet
  • M.O.L.E.® MAP Software
  • Start/Zones Magnet Kit [P&C]
  • Quick Reference Guide
  • Carrying Box


M.O.L.E.® MAP is ECD's software for setup, download, analysis, and data storage that powers the SuperM.O.L.E.® Gold 2 thermal profiler, the MegaM.O.L.E.® 20, the V-M.O.L.E.®, and the classic SuperM.O.L.E.® Gold.

Learn more about M.O.L.E.® MAP Software


Five workflow Wizards will get you up and running in no time.


Get the data you want, the way you want it. Step by step wizards guide you through selections for worksheet modifications and data table templates so you can display the information specific for your company’s process needs.

Process Focused

  • Recipe Generator helps set an initial, in-spec profile oven recipe in three easy steps.
  • Prediction tools to fine-tune a recipe - A great assist for recipe development means you can make quick adjustments to a profile.


OvenRIDER® NL 2 Kit

Data Collection

With M.O.L.E.® (Sold Separately)

© ECD, 1996 - 2022. All rights reserved.