ECD website uses cookies to ensure you get the best experience on our website.


Home / Products / ECD Thermal Profile Accessories /

Temprobe™

Redesigned for improved ruggedness!

ECD’s redesigned TEMPROBE™ provides all of the advantages of the original in a new, more durable construction for longer life. A patented, precision temperature sensing instrument, TEMPROBE has been engineered to offer an alternative to traditional thermocouples for high-value PCBs. The device can be quickly placed directly on the PCB and the miniaturized thermocouple tip is capable of precise temperature measurement of critical solder joints and components – even in wet solder paste or on fine-pitch component leads. TEMPROBE is compatible with all thermal profilers.

Features

Quality, Precision, Function

  • Prevent PCB Damage
  • Eliminate soldering or bonding of thermocouples to PCBs.
  • Cut Labor Cost - Installation and removal take just seconds.
  • Produce Reliable Profiles - High contact pressure and low thermal mass give fast, reliable response.
  • Profile in Wet Solder Paste - Profile the first pass of a PCB through the oven.
  • Monitor Temperature Anywhere - Small, durable thermocouple tip fits in tight places.

Benefits

  • Profile on the first pass through the oven by placing the Temprobe™ thermocouple tip in wet solder paste.
  • Profiles are more accurate with Temprobe™ because no added material (solder or epoxy) is used for attachment.
  • The Temprobe™ Thermocouple tip is preloaded to maintain high contact pressure throughout the profile.
  • Temprobe™ makes it easy to take more profiles with greater reliability, to support ISO and SPC data requirements.
  • Temprobe™ cuts labor, PCB rework and scrap to provide quick payback!
  • No costly sacrificial test boards for temperature profiling.
  • No soldering or bonding, so no residue or mechanical damage to the board assembly
  • No need to rerun profiles because a taped down wire thermocouple lifted off the board.

Specifications

Compatibility: SuperM.O.L.E.® Gold 2, SuperM.O.L.E.® Gold and V-M.O.L.E.®
Maximum reach radius: 5.5 in (14 cm) Height with clamp: 0.55 to 0.49 in (14 to 12.5 mm) above PCB
Probe Weight: 14 grams (less cable & connector)
Probe material: Stainless Steel
Temperature limit: 572° F (300°C)
Sensor: Type K junction
Lead wire: 24 in. (60 cm) long, with Kapton® insulation
Special Limits of Error: Less than ± 1.1° C (Per ANSI MC 96.1)

Download Complete Specifications

Equipment

Standard Kit Photo Part Number Superstore
Temprobe™, Standard (LEAD FREE) with Mini Connector E45-0783-78
Temprobe™, SMG (LEAD FREE) with Micro Connector E45-0764-68



Accessories Photo Part Number Superstore
Temprobe™ Ball Joint, Hi-Temperature E40-0200-30
Temprobe™ Clamp, Hi-Temperature E40-0200-35



Software

M.O.L.E.® MAP is ECD's software for setup, download, analysis, and data storage that powers the SuperM.O.L.E.® Gold 2 thermal profiler, the MegaM.O.L.E.® 20, the V-M.O.L.E.®, and the classic SuperM.O.L.E.® Gold.

Learn more about M.O.L.E.® MAP Software

Easy-to-Use

Five workflow Wizards will get you up and running in no time.

Flexible

Get the data you want, the way you want it. Step by step wizards guide you through selections for worksheet modifications and data table templates so you can display the information specific for your company’s process needs.

Process Focused

  • Recipe Generator helps set an initial, in-spec profile oven recipe in three easy steps.
  • Prediction tools to fine-tune a recipe - A great assist for recipe development means you can make quick adjustments to a profile.

Images

Temprobe™ for SMG

Temprobe™ with Mini Connector

Temprobe™ on a PCB Board

© ECD, 1996 - 2020. All rights reserved.