Zone Sensor Battery

<< Click to Display Table of Contents >>

Navigation:  Sensor Platforms > OvenRIDER® NL 2+ > Service and Troubleshooting >

Zone Sensor Battery

The zone sensor LED is powered by a 3.6 volt ½ AA lithium battery. If the zone sensor LED is dim or does not illuminate when the OvenRIDER® NL 2+ passes a zone boundary magnet, check the battery to see if it has become discharged. Always replace with SAFT lithium battery (LS 1425) or the equivalent specified.


Make sure that the OvenRIDER® NL 2+ is not stored near any magnets. This can cause the zone sensor LED to stay illuminated, and discharge the battery.