This Users Help System provides typical information for using ECD M.O.L.E.® Thermal Profiling Systems, Sensor Platforms & M.O.L.E.® MAP Software. Use the Contents tab or select a specific product to view it's Help content:
Instruments |
|||
|---|---|---|---|
|
|
|
|
SuperM.O.L.E.® Gold 2 |
SuperM.O.L.E.® Gold |
MEGAM.O.L.E.® 20 |
V-M.O.L.E.® |
|
|
|
|
MiniM.O.L.E.® rH |
|
|
|
.png)
.png)
.png)
.png)
.png)
Sensor Platforms |
|||
|---|---|---|---|
|
|
|
|
WaveRIDER® NL 2 |
OvenRIDER® NL 2+ |
OvenCHECKER™ |
SelectiveRIDER™ |
|
|
|
|
Breadometer® |
VaporWATCH® |
|
|
.png)
.png)
.png)
.png)
.png)
.png)
This Users Help System explains how to use ECD Thermal Profiling instruments and software.
This Users Help System is written for users of varied experience. If a section covers information you already know, feel free to skip to the next section.
•You do not need to be a computer expert to use this Users Help System or the software.
•The Users Help System assumes you are familiar with Microsoft® Windows® Operating Systems.
|
Hardware portions of this manual are written to reflect the following firmware versions: •MEGAM.O.L.E.® 20, V-M.O.L.E.® and SuperM.O.L.E.® Gold 2: 10.80 and higher. •SuperM.O.L.E.® Gold: 9.08 and higher. The software portions reflect version(s) 3.21 and higher. |
.png "Important Information")
|
The M.O.L.E.® MAP software is designed to be used with the follwing ECD Thermal Profilers: SuperM.O.L.E.® Gold 2, MEGAM.O.L.E.® 20, V-M.O.L.E.®, SuperM.O.L.E.® Gold, & MiniM.O.L.E.® rH References used in common operation and software sections of this Users Help System may refer to the SuperM.O.L.E.® Gold 2. |