ECD Home Page

Side RIDER

Temprobe™

Reflow Rider™

E-Z Rider™

Side Rider

Board Carriers

FlexiProbe™

ECD's SuperM.O.L.E.™

Technical Information

Industry Links

Home

 

Profiling...Easier than Ever
With Your Profiler Carried Securely in Small Tunnel, Belt-less Reflow Ovens

Side Rider™, an expandable safety platform designed to carry a M.O.L.E.® or another manufacturers Profiler securely through beltless reflow ovens that have very tight tunnel tolerances.

Available in two basic pan widths, 5.5" and 6.5" for different profiler models, the Side Rider has a slightly lowered "nest" that holds the profiler assembly (profiler in its protective thermal barrier) securely just below the level of the oven chain, creating additional above rail top clearance of .374" (9.5 mm). This eliminates two large problems for rail only ovens with tight tunnel space; the profiler will not get stuck in the tunnel and it is impossible for the profiler to fall from the Side Rider and be damaged or destroyed in the oven as often happens using other types of carrier methods. A third 5'.5" flat pan is also included for center rail support avoidance.

The Side Rider platform can be used alone for narrow rail widths or with an "Outrigger"; an expandable rugged, metal frame with scissors action extension. This extender may be used on only one side of the Side Rider, or with one on each side of the Side Rider platform.

The Side Rider is easy to set up: adjust the rail width to the size of the board that will be used to set up the oven profile, instrument the board with the desired number of thermocouples attached to the profiler. Then place the M.O.L.E. into its thermal barrier and the whole assembly fits securely into the recessed nest in the Side Rider platform. The profiler rides the rails securely behind the wired board. Safely profile and characterize the oven in only minutes.

The Side Rider is ruggedly designed and made of stainless steel for long life. With the Outrigger extension, it expands up to 8" (205 mm). The Side Rider is readily available and ships from stock. It is compatible for use with all profiling products.

SPECIFICATIONS
Model E42-7433-00
Width adjustment range:  
Profiler size range:

 

 
Weight:  
Side rail material: Stainless Steel
Arm and body material:  
Fasteners: Stainless steel

  ECD
4287-B SE International Way
Milwaukie, OR 97222 USA

Phone 503-659-6100
Fax 503-659-4422

Email:
saunders@ecd.com
 

Temprobe™ | Reflow Rider™ | E-Z Rider™ | Board Carriers

ECD's SuperM.O.L.E.™ | Technical Information | New Products | Industry Links | Privacy | ECD Home | Saunders Home