Profiling...Easier than Ever
With Your Profiler Carried Securely

E-Z Rider is designed to carry your profiler safely through wave solder machines. E-Z Rider's titanium side rails are gripped by the finger conveyors, and support the profiler well above the solder wave.

Adjusts to the exact width of your circuit board in seconds. Just separate the side rails to match the width of your board, and lock them in place with the turn of a screw. Place your profiler on the carrier, where it is securely held by tow arms and a backstop, and slide it onto your edge rail or finger conveyor.

SPECIFICATIONS

Model	E-Z Rider
Width adjustment range:	3.25 to 20 in. ( 8 to 51 cm)
Profiler size range:	Up to 6.75 in (17 cm wide)
	Up to 13 in (33 cm) long
Weight:	0.85 lb (390gm)
Side rail material:	Titanium
Arm and body material:	Clear hard anodized aluminum
Fasteners:	Stainless steel

Note: An optional bracket is available for the E-Z Rider which allows your profiler to be set on edge, in cases where the profiler is wider than the board it follows.

Instructions