ECD website uses cookies to ensure you get the best experience on our website.

Home / Products / Thermal Profilers /

V-M.O.L.E.® Solar

Easy-to-use ~ Value-priced

ECD's V-M.O.L.E.® Solar Profiling System for solar cell metallization

Critical solar device efficiencies resulting from the "Metallization process" are driven by key process parameters:

  • Temperature Ramp Rate
  • Hold Time (Dry Time)
  • Time Above Temperature
  • Peak Temperature
  • Cooling Rate

ECD's V-M.O.L.E.® Solar Profiling System is designed to provide assurance that these key process parameters are met quicker and easier than any other profiler on the market.

V-M.O.L.E. Solar Thermal Profiler Logo V-MOLE Solar Thermal Profiler


  • Email
  • Phone


  • Email
  • Phone


  • 3 Channels, all you need to do profile verification
  • 90+ Runs between downloads, eliminating lost data trips to PC. Profile all day, download to your computer later
  • Instant Profile Verification with the patented “OK” Test Button simplifies the evaluation process to a Go/No-Go answer.
  • USB Connectivity – One cable for uploading set-up, downloading data and battery charging
  • Ultra thin / ultra light
  • Quick Instrument status: with the M.O.L.E.® Readiness indicators...
    • Sufficient battery charge
    • Cool enough to run again
    • Thermocouple connectivity to eliminate wasted runs


  • Simplified Connections: 3 Type K Industry Standard Mini T/C inputs, all you need to verify a profile.
  • Internal Lithium Polymer battery gives you years of life and the confidence you won't run low unexpectedly
  • Single-run charge in 15 minutes
  • No additional cables or adapters needed. Uses USB just like your camera
  • Engineers can be confident in deploying their Target-10 specifications to line operators with the Green Light/Red Light “OK” Test Button
  • No battery discard issue
  • One charge easily covers a day of profiling Quick verification with the “OK” Button: without doing a PC download


Temperature measurement range: -200 to 1271°C (-328 to 2,319°F)
Operational temperature range: -40° to +85°C (-40 to 185°F)
Thermocouple: 3 Mini Connectors, Type K
Accuracy: +/- 0.5° C (0.9° F)
Resolution: 0.056°C (0.1° F)
Physical Dimensions: 145mm x 64mm x 7.62mm (5.71in x 2.52in x 0.3in)
Sampling Interval: 0.1 seconds to 24 hours
Data Storage: 90+ Runs before download
Power Supply: Rechargeable Lithium Polymer

Download Complete Specifications


Standard Kit Photo Part Number  
• V-M.O.L.E.® Solar Kit E50-0765-00
Includes the following:
  • V-M.O.L.E.®, 3-Channel Profiler, RoHS Compliant
  • Standard Mini Connectors
  • Stainless Steel Thermal Barrier
  • Yellow Jacket Thermal Barrier Cover
  • Glass set of 3 36-gauge [.005”/.127mm], 3ft/914mm 482°C/900°F
  • M.O.L.E.® MAP Software
  • PC USB 2.0 Cable (Set-up & Download)
  • Quick Reference Guide
  • Soft Carrying Case


M.O.L.E.® MAP is ECD's software for setup, download, analysis, and data storage that powers the SuperM.O.L.E.® Gold 2 thermal profiler, the MegaM.O.L.E.® 20, the V-M.O.L.E.®, and the classic SuperM.O.L.E.® Gold.

Learn more about M.O.L.E.® MAP Software


Five workflow Wizards will get you up and running in no time.


Get the data you want, the way you want it. Step by step wizards guide you through selections for worksheet modifications and data table templates so you can display the information specific for your company’s process needs.

Process Focused

  • Recipe Generator helps set an initial, in-spec profile oven recipe in three easy steps.
  • Prediction tools to fine-tune a recipe - A great assist for recipe development means you can make quick adjustments to a profile.


Standard Kit

Thermal Barrier

Thermal Barrier (Open)

© ECD, 1996 - 2018. All rights reserved.