M.O.L.E.® AttachEz™ are just one of many methods to attach a thermocouple to a PCB or other point of interest.
Accuracy depends on the T/C (thermocouple) itself. So the method to stick it down aims more for ease of use and minimal impact on the reading. Since actual "attachment" of T/Cs is the most commonly reported barrier to the prudent thermal profiling that people know they should be doing, M.O.L.E.® AttachEz™ save time, and should encourage better process control and profiling protocols.
M.O.L.E.® AttachEz™ are on par, for accuracy, with all the other popular methods of attaching a T/C. They are very fast to attach, reusable, stick well to flat or curved surface, and provide number Identification as well. They’re just generally a more elegant way to attach a thermocouple. We claim 10 uses, but others would tell you we’re very conservative. Factor in the reusability, and we think you’ll agree... AttachEz™ are the cost-effective way to get the job done.
For a thorough discussion of the various methods of thermocouple attachment, please visit our BLOG at: www.ECD.com/BLOG and head for Thermocouple Attachment.
Save time in attaching/detaching/reattaching Thermocouples.
Aid accurate placement of Thermocouples.
Are reuseable.
Are compatible with Pb-free profiling temperatures, and remove the frustration of Thermocouple attachment that inhibits process engineers from doing what know to be a prudent step in PDB Assembly... Thermal Profile Verification.
Material:
Glass Cloth
Adhesive:
Silicone
Thermocouple Size:
30-gauge [.010”/.254mm] and smaller
Physical Dimensions (Assembled):
0.35" X 1.00" (8.89mm x 25.4mm)
Physical Dimensions (Contact Area):
0.35" X 0.25" (8.89mm x 6.35mm)
Total Thickness (Contact Area):
0.0075" (0.19mm)
Temperature range:
-65° to 450°F (-54° to 232°C)
Can withstand intermittent (minute) temperatures up to 550°F (288°C) or higher, depending upon the type and duration of the heat source.
Continuous exposure to temperatures above 450°F (232°C) will gradually degrade the adhesive causing loss of tape adhesion and darken the glass cloth.
