Step 4 - Record Profile Measures

Now that a product has been properly configured, the user can start recording profile measures.

To record profile measures:

1)	Select the pre-defined product from the Product ID selection box.

69280016

Product Selection Box

2)	Start the product monitoring process by selecting the Start command button on the Watch Control panel.

Symbol_(Tip)

The Start command can also be accessed on the OvenWATCH menu.

69280007

Start Recording

3)	When the OvenWATCH is recording data a Dynamic Profile is displayed in the Data Graph as dashed Data plots. They represent a predicted profile based on the current temperatures and conveyor speed of the oven and the Baseline Profile.

69280017

Dynamic Profile

If an alarm is triggered during the recording process, the Alarms - List appears.

69280019

Alarms-List

Once the Alarms-List appears select the Acknowledge command button to stop the alarm. Once it has been acknowledged the operator can then proceed to troubleshoot the problem. Once the problem has been resolved selecting the Clear command button will remove the alarm from the Alarms List.

Symbol_(Info)

Acknowledged Alarms will not sound again even if the alarm condition persists. Once the alarm condition is cleared, and the same alarm condition remains the alarm will be displayed in the Alarm List again.