Archive for category Wave Solder

Much of what takes place in a Wave solder machine boils down to 4 basic measurements:
(see Figure 1)

1. (Max preheat) How hot the board is just before it hits the wave
2. (Dwell time) how long do you spend in the wave
3. (Contact temp) Temperature of the solder at the contact surface with the board
4. Conveyor speed

All the rest of the many measurable parameters are secondary to these in my opinion. Let’s talk a little about each of these as measured by the WaveRIDER SPC software:

Figure 1: WaveRIDER SPC Software

Read the rest of this entry »