Charging the Power Pack

<< Click to Display Table of Contents >>

Navigation:  Instruments > V-M.O.L.E.® > Setup >

Charging the Power Pack

Because the M.O.L.E. Profiler is powered by a rechargeable Power Pack, it is important that it is charged and operating properly prior to performing every experiment. When using a MEGAM.O.L.E.® 20 or SuperM.O.L.E.® Gold a spare removable Power Pack may be ordered so one is charging while the other one is being used.

To charge the power pack battery:

1)Insert the USB computer interface cable into a computer USB Port and the other end into the Data/Charging Port.



A completely discharged battery takes about 8 hours to be fully charged. For quick charges, the battery can be charged for 15 minutes allowing one 10 minute data run to be performed.

Important Information

The Power Pack can be charged continuously whenever the M.O.L.E. Profiler is not being used, however, if the M.O.L.E. Profiler is going to sit idle for five days or more, it should be removed from the charger.