The RH Humidity Data Table includes various user configured parameter values. Each column after the Sensor Locations allows the user to define parameters using the Template commands. Each row in the Data Table represents the channel sensor data from the M.O.L.E. Profiler.
|1)||Sensor Locations: The user can use the Sensor Location cells in the Data Table to describe the location where each sensor is connected to the test product. The color and description indicates which Data Plot on the Data Graph it represents. Refer to topic Sensor Location Description for more information.|
|2)||Channel Check Boxes: The Channel check boxes control whether the associated Data Plot is displayed on the Data Graph and whether the data for that channel are included in the data table calculations. Refer to topic Channel Check Boxes for more information.|
|3)||Data Table Template: The Data Table is built using a template file (*.TPH) overlaid on a cell grid. Columns to the right of the Channel check boxes and Sensor Locations allow the user to define parameters using the Template commands. Refer to topic Data Table Template for more information.|
|4)||Value Pop-up: Each value in the Data Table can be displayed as a Value Pop-up. A Value Pop-up is graphically illustrated on the Data Graph showing how and where that value was extracted from the profile. Refer to topic Sensor Location Description for more information.|
|5)||Specification Limit Indicators: Each Parameter displayed on the Data Tab can have both Lower and Upper specifications applied. If a specification limit is violated, the software displays a red or blue indicator on the left edge of the Data Table cell. Refer to topic Specification Limit Indicators for more information.|