Instrument Status

<< Click to Display Table of Contents >>

Navigation:  Software > Menu and Tool Commands > M.O.L.E. Menu >

Instrument Status

This command displays the health of the M.O.L.E. Profiler such as battery charge, internal temperature, thermocouple temperatures. This command also allows the user to display items that will prevent the user from completing a successful data run.

Important Information

This is available in both Engineer & Verify Modes.

 

To display the instrument status:

1)On the M.O.L.E. menu, click Instrument Status and the dialog box appears.

Important Information

If an instrument is not currently connected to the computer, the default Demonstration MEGAM.O.L.E.® 20 Profiler is displayed.

Important Information

If the I/O module is not connected to the MEGAM.O.L.E.® 20 Profiler, the software will display a warning message that the instrument is not communicating.

mole_map-2820

Important Information

If everything is OK, the dialog box displays a GREEN symbol. If there are any items that may prevent the user from collecting good data, they are highlighted and a yellow Warning symbol is displayed.

mole_map_status-go

mole_map_status-warning

OK

Warning

mole_map-2830

2) Click the OK command button to close the dialog box.