M.O.L.E.(r)

<< Click to Display Table of Contents >>

Navigation:  Software > Menu and Tool Commands > File Menu > Preferences >

M.O.L.E.(r)

To access M.O.L.E. preferences:

1) On the File menu, click Preferences, and then click the M.O.L.E.(r) tab.

mole_map-2350

M.O.L.E.

Update Firmware:

 

If a new version of the MEGAM.O.L.E.® 20 Profiler firmware is released by ECD, the user can use the Update Firmware wizard to upgrade to the newest version.

 

To update MEGAM.O.L.E.® 20 Profiler firmware:

1)On the File menu, click Preferences, and then click the M.O.L.E.(r) tab.
2)In the MOLE section, click the Update Firmware command button and the software automatically scans for a selected instrument. If there is no instrument selected, the Select Instrument dialog box appears.

mole_map-2360

3)Select the OK command button.

Important Information

Updating the MEGAM.O.L.E.® 20 Profiler firmware erases any stored data runs. Make sure they have been downloaded prior to completing this process.

4)Click the Yes command button to proceed with the update or No to cancel.

mole_map-2370

5)Navigate to the file folder where the firmware file *.BIN is located.
6)Select the firmware file.
7) Click the Open command button to start updating the firmware.

mole_map-2380

8)When the update firmware process is complete, select the OK command button.

mole_map-2390

Calibration Interval

When reporting the instrument status, the software can inform the user when the M.O.L.E. Profiler calibration has expired.

 

To set the calibration interval:

1)On the File menu, click Preferences, and then click the M.O.L.E.(r) tab.
2)In the Calibration Interval section, select 6 or  12 months from the drop down box.
3)Select the Apply or OK command button to save.

 

Show

The Status bar located on the bottom of the software display can display the status of the M.O.L.E. Profiler Power Pack battery,  Internal operating temperature, connected COM Port. Additionally the user can decide to display M.O.L.E. status information on the Data Graph. These options are globally set for the current Environment.

Tip

The Show options can also be accessed by selecting the Show on Profile command in the M.O.L.E. menu.

 

Print Select

Select the corresponding check box to include the M.O.L.E. information when printing as a default.